Installation, Safety, and Maintenance Guidelines
- Professional Installation Recommended
- For optimal performance and compliance with regulations, it is strongly advised to have the device professionally installed.
- Mounting Location
- Install the device in a location that does not obstruct the driver's view of the road or interfere with the deployment of airbags or other safety equipment.
- Ensure the device and its cables do not interfere with vehicle controls such as steering, brakes, clutch, or accelerator pedals.
- Cable Management
- Route cables to avoid interference with vehicle operations and prevent entanglement with the driver or passengers.
- Keep cables away from moving parts, heat sources, and areas where they could be pinched or damaged.
- Use cable management tools (e.g., zip ties, adhesive clips) to secure cables firmly in place.
- Electrical Connections
- Follow the vehicle manufacturer's guidelines and local regulations for all electrical connections.
- Do not modify, cut, or splice existing vehicle wiring.
- Use only the power adapter and cables provided with the device or approved by the manufacturer.
- Compliance with Local Laws
- It is the owner/operator's responsibility to ensure the device complies with all applicable local, state, and federal laws, especially regarding privacy and electronic surveillance.
- Familiarize yourself with regulations concerning audio and video recording in your jurisdiction and adhere to them.
- Regular Maintenance
- Inspection: Periodically inspect the device, its mounting, and cable connections to ensure they remain securely attached and properly positioned.
- Cleaning: Keep the camera lenses clean by using a soft cloth to ensure clear recordings. Avoid harsh chemicals that could damage the lens.
- Device Health: Check system status indicators (LEDs) regularly to confirm proper operation. Refer to the article Understanding LED Statuses for detailed information.
- Updates: Perform firmware updates as recommended by the manufacturer to maintain the latest features and security enhancements.
- Distraction Warning
- Do not operate, adjust, or view the device while driving. Safely pull over before making any changes to settings or reviewing footage.
- Modifications
- Do not modify, disassemble, or attempt to repair the device. Unauthorized modifications may void the warranty and compromise safety features.
- Emergency Services
- In the event of an accident or emergency, prioritize personal safety and contacting emergency services over operating the device.
By following these installation, safety, and maintenance guidelines, you can ensure the device operates efficiently, complies with regulations, and maintains its performance over time.
Related Articles
RoadEazy RZ1 Installation (Video)
RZ1 Installation Troubleshooting
During the installation process, the system performs four main verification tests to ensure proper device functionality: Power Connection, Mobile Network Connection, GPS Connection, and Cloud Connectivity. If any of these tests fail, it may prevent ...
MiTAC K220 Installation Guide
This article will show you everything you need to install the K220, and how to do so. Package Contents: At a Glance: Installation Steps: Find the right spot to install the camera. Do not block your view of the road or the rear view mirror. Use the ...
Installing Auxiliary Cameras with the RZ41 Vision Hub
The RZ41 AI Vision Hub expands the RoadEazy RZ1 Vehicle Gateway, adding up to four auxiliary cameras per unit. This gives fleets full coverage of blind spots, cargo areas, and equipment zones. For larger setups, two RZ41s can be linked to a single ...
How to Mount and Wire the RZ1 Device (OBD)
The RoadEazy RZ1 system is designed for a simple and straightforward installation process. Follow these step-by-step instructions to properly install the RZ1 Vehicle Hub and Camera. Vehicle Hub Installation: Locate the Vehicle's Diagnostic Port ...