Using an SD Card with the RZ1 Hub

Using an SD Card with the RZ1 Hub

This article explains what the SD card is used for, how to install it, when it’s needed, how to enable it in the Fleet App, and how to format it if necessary.

What is the SD Card Used For?

The SD card is used to extend the RZ1’s memory capacity and increase the amount of video footage that can be recorded and stored locally. While the SD card is optional for the base RZ1 device, it is required for the operation of auxiliary cameras.

How to Add the SD Card

  1. Locate the cover at the bottom of the RZ1 Hub

  2. Remove the screw and open the cover

  3. Insert the SD card into the internal slot until it clicks

  4. Close the tamper cover

  5. Re-secure it with the screw

 

NotesNote
Once inserted, please let us know so that we can enable SD card recording and format the card to begin saving footage by emailing support@hdfleet.com.

    • Related Articles

    • How to Reseat Your Dash Cam's SD Card

      This guide will go over how to re-seat your SD Card. This is useful if your SD Card is not being detected. Reseating the SD Card: Using the special screwdriver provided to you in the box when you first purchased the dash cam, remove the safety screws ...

    • How to Grab Driver Footage From the SD Card

      View driver footage from your laptop/computer. This is an alternative method for viewing footage outside of our platform. There are 3 options that you can use to plug your SD card into your computer. 3 Different Options: Using an SD card reader. This ...

    • SD Card Recommendation for Dash Cams

      We recommend the following SD cards for purchase, depending on your storage needs: SanDisk High Endurance Card: SanDisk 512GB High Endurance Video microSDXC Card with Adapter for Dash Cam and Home Monitoring Systems - C10, U3, V30, 4K UHD, Micro SD ...

    • What is in the RZ1 Dash Cam Box?

      Before we begin, make sure you have received all these items in your box: Main Package: The primary package includes the core components necessary to get your RZ1 system operational: RZ1 Vehicle Hub: The central unit responsible for collecting ...

    • Understanding LED Statuses

      RZ1 Vehicle Hub’s LEDs POWER LED Green: The hub is connected to power and is in either an active or standby state. GNSS LED (GPS Status) Off: The hub is in standby mode, and the GNSS and CELL LEDs are inactive. Red: The GNSS is active but has not ...