Connected Vehicles Subscriptions

Connected Vehicles Subscriptions

Connected Vehicles Subscriptions

Package Starter Basic Advanced Not Available Currently - Premium Add-Ons to Basic and Advanced 
Frequency Ignition On/Off Only Default Default Default
Ignition On/Off X X X -
CAN Odometer X X X -
DTC X X X -
Fuel X X X -
Engine Hours X X X -
Geolocation* X X X -
Real Time Telemetry - X X -
Battery Voltage - X X -
TPMS ( Tire Pressure) - X X -
BCM Signals (Doors, Windows, etc.) - X X -
Oil Life - X X -
OEM Specific Maintenance Signals - X X -
Driver Behavior (HA/HB/HC) - - X -
Safety and ADAS** - - - X
EV** - - - X
Remote APIs (Location, Lock/Unlock, etc.) ** - - - X
*GPS Data Intervals
Toyota - Every 60 seconds
Ford, GM,  Stallantis - Every 30 seconds

    • Related Articles

    • Blue Button Process - GM Vehicles Only - Connected Vehicle Program

      Blue Button Process for GM Vehicles The driver will simply push the blue OnStar button on the rearview mirror, listen closely to the prompts, you may have to push a second time. When connected to an OnStar Advisor, please request: "Please connect me ...
    • Connected Vehicle - Ford Connect Troubleshooting

      Start vehicle with ignition on and take out of transport mode (most vehicles are not out of transport mode, so these steps may not be necessary) Transport Mode Deactivation Turn key to 'on' position Wait for chimes to stop Depress brake pedal 5 times ...
    • Suntech 4932 Installation Quick Sheet

      Installation Mounting instructions for a Suntech 4932 tracker. Note: The ST4932 must be securely fastened to accurately report Events and Alerts. Note: Do NOT use adhesive to attach the ST4932. Mounting Guidance Method Best ST4932 mounting holes ...
    • Suntech 4932 LED Statuses

      LED Statuses When the ST4932 is active the LEDs blink in repeated sequences, see the table below. LEDs will deactivate while in Sleep or Deep Sleep modes and not reporting. Red LED GNSS (GPS) Status Blue LED Cellular Status Purple LED Battery SOC 1 ...