Suntech 4932 LED Statuses

Suntech 4932 LED Statuses



LED Statuses

When the ST4932 is active the LEDs blink in repeated sequences, see the table below.
Notes
LEDs will deactivate while in Sleep or Deep Sleep modes and not reporting.
Red
LED
GNSS (GPS) Status
Blue
LED
Cellular Status
Purple
LED
Battery SOC
1
Location fixed
1
Carrier connected
Server connected
1
25%
2
Location not fixed
2
Server not connected
2
50%
4
Antenna error
3
GPRS/HSPA error
3
75%
-
-
4
Carrier not connected
4
<100%
-
-
5
SIM PIN locked
Off
Fully charged
-
-
6
Cannot attach NW
-
-
-
-
7
No SIM
-
-
-
-
8
SIM PUK locked
-
-


    • Related Articles

    • Suntech Battery Life Chart

      This article was put together to provide the expected life cycle of a battery in our Suntech devices in a normal situation. Alert Heat or other factors could affect the duration and longevity of the battery. 4290 Unit: ( This unit has been replaced ...

    • Suntech 4932 Installation Quick Sheet

      Installation Mounting instructions for a Suntech 4932 tracker. Note: The ST4932 must be securely fastened to accurately report Events and Alerts. Note: Do NOT use adhesive to attach the ST4932. Mounting Guidance Method Best ST4932 mounting holes ...

    • Suntech ST4950 Installation

      This guide will go over how to install the device in your vehicle. Installation: You can power on and off the device using the provided MagKey. Make sure to reference the image below for placement. Action MagKey in Position LED Flash Pattern Turn ...