Reset the Surfsight Dashcam - Pin Reset

Reset the Surfsight Dashcam - Pin Reset

Reset the Surfsight Dashcam - Pin Reset

  1. Locate the Reset button on the side of the dashcam by removing the SIM/SD cover on the side of the camera.



  2. Press the Reset Button until the camera screen goes black (a paperclip or pushpin will work) — then release (2-3 seconds).

    Notes
    Caution:
    Pressing the button too hard can damage the hardware.

  3. Wait for the camera to power back up.  This may take up to 5 minutes. The screen will go blank and then the dashcam restarts with the factory settings.

    • Related Articles

    • How to Factory Reset Your Dash Cam

      This guide will show you how to reset your camera for troubleshooting purposes. Factory Resetting the Dash Cam: First, wake up the dash cam and put in the default PIN of 3333, or use your own PIN if you have already created one. Go to the Settings ...

    • Why Does My Dash Cam Not Power On?

      In this guide, we will go through different troubleshooting methods for figuring out why your dash cam won't turn on. Alert If this is a brand new dash cam or if it has been in storage for a while, it might need to charge for up to 1 hour before it ...

    • Why Does My Camera Not Have an Internet Connection?

      The most common cause for not having an internet connection is that the SIM may be unseated. This guide will walk you through on how to diagnose this issue. Locating the Information: On your dash cam, unlock it and go to the More Info screen. If the ...

    • How to Connect the AI-12 Dash Cam to a Power Source

      To utilize all the features of the AI-12 dash cam, including Standby mode, it must be connected to a constant power source. The dash cam should only be connected by using the provided power cables. If the installation is canceled and the dash cam has ...

    • Surfsight Firmware Upgrade to 3.12.206

      Firmware Upgrade to 3.12.206 Confirm the camera is connected to power. Remove SD/SIM cover using tri-wing screwdriver that came with your camera. Push down to eject the existing SD Card (slot that is closest to front side of camera). Insert the ...